ContactICSI Pipettes
For intracytoplasmic injection of sperm inside the oocyte.
Main characteristics:
- Spiked tip to minimize damage to oocyte
- Smooth handling of sperm and cytoplasm
- Availible with long or short parallel walls
- Three different internal diameters: 4.0-4.5 μm, 4.5-5.0 μm and 5.0-5.5 μm
- Two different angle options: 30° and 35°
- Tip to elbow length range: from 0.50 mm to 1 mm
| Type | CODE | ORDER NUMBER | OUTER DIAMETER (μm) | INNER DIAMETER (μm) | TIP BEND ANGLE (°) | TIP TO ELBOW LENGTH (mm) |
| Short Parallel Walls “A Type” | MT-INJ-2S45-30 | 95200 | 5-6 | 4-4.5 | 30 | 0.70 |
| MT-INJ-2S45-35 | 95201 | 5-6 | 4-4.5 | 35 | 0.70 | |
| MT-INJ-2L45-30 | 95202 | 5-6 | 4-4.5 | 30 | 1.00 | |
| MT-INJ-2L45-35 | 95203 | 5-6 | 4-4.5 | 35 | 1.00 | |
| MT-INJ-2S50-30 | 95230 | 6-7 | 4.5-5 | 30 | 0.70 | |
| MT-INJ-2S50-35 | 95231 | 6-7 | 4.5-5 | 35 | 0.70 | |
| MT-INJ-2L50-30 | 95232 | 6-7 | 4.5-5 | 30 | 1.00 | |
| MT-INJ-2L50-35 | 95233 | 6-7 | 4.5-5 | 35 | 1.00 | |
| MT-INJ-2S55-30 | 95260 | 6-7 | 5-5.5 | 30 | 0.70 | |
| MT-INJ-2S55-35 | 95261 | 6-7 | 5-5.5 | 35 | 0.70 | |
| MT-INJ-2L55-30 | 95262 | 6-7 | 5-5.5 | 30 | 1.00 | |
| MT-INJ-2L55-35 | 95263 | 6-7 | 5-5.5 | 35 | 1.00 |
| Type | CODE | ORDER NUMBER | OUTER DIAMETER (μm) | INNER DIAMETER (μm) | TIP BEND ANGLE (°) | TIP TO ELBOW LENGTH (mm) |
| Long Parallel Walls “Slim Type” | MT-INJ-1S45-30 | 95204 | 5-6 | 4-4.5 | 30 | 0.50 |
| MT-INJ-1S45-35 | 95205 | 5-6 | 4-4.5 | 35 | 0.50 | |
| MT-INJ-1L45-30 | 95206 | 5-6 | 4-4.5 | 30 | 1.00 | |
| MT-INJ-1L45-35 | 95207 | 5-6 | 4-4.5 | 35 | 1.00 | |
| MT-INJ-1S50-30 | 95234 | 6-7 | 4.5-5 | 30 | 0.50 | |
| MT-INJ-1S50-35 | 95235 | 6-7 | 4.5-5 | 35 | 0.50 | |
| MT-INJ-1L50-30 | 95236 | 6-7 | 4.5-5 | 30 | 1.00 | |
| MT-INJ-1L50-35 | 95237 | 6-7 | 4.5-5 | 35 | 1.00 | |
| MT-INJ-1S55-30 | 95264 | 6-7 | 5-5.5 | 30 | 0.50 | |
| MT-INJ-1S55-35 | 95265 | 6-7 | 5-5.5 | 35 | 0.50 | |
| MT-INJ-1L55-30 | 95266 | 6-7 | 5-5.5 | 30 | 1.00 | |
| MT-INJ-1L55-35 | 95267 | 6-7 | 5-5.5 | 35 | 1.00 |
Each lot of Micro Tools receives the following tests:
- Endotoxin: ≤ 0.5 EU/device by LAL methodology
- MEA (Mouse Embryo Assay): Two cell assay ≥80%
Instructions
